Brand New! The Strata CIX40 processor GCTU2A installs in a dedicated CIX40 cabinet slot. It is the same card for both CIX40 R1 (Revision 1) and CIX40 R2 (Revision 2) cabinets.
The Strata CIX40 uses a high-speed 32-bit RISC processor, DRAM working emmory, SRAM with lithium battery to back-up memory.
The Strata CIX40 processor has the following standard components built-in:
-
Secure Digital (SD) memory card interface for program data backup, software upgrades, alarms, error logs, and admin logs done locally or remotely.
-
Network Interface Card port provides one circuit for 100base-TX Ethernet LAN connection of the eManager computer, ACD Server, CIX Attendant Console, and CSTA applications.
-
33.6 Kbps/V.34 AMDS1A maintenance modem equipped at the factory for connecting the eManager administration tool locally or remotely.
-
One Music-on-hold (MOH)/Background Music (BGM) RCA jack to interface with external MOH and/or BGM sources. The CIX40 can have up to three MOH/BGM source interfaces by adding two additional MOH/BGM input sources, connected to the Standard Telephone interfaces.
-
One External Page RCA jack to interface with a Toshiba External Amplified Speaker control box (BESCB1A) with a customer supplied speaker or a customer-supplied page amplifier and speaker(s) for external paging, night ring over external page, and external BGM applications.
-
One Relay control interface that provides an interface to a normally open relay contact which can be programmed to control a Night Bell, door lock or to mute BGM during an external page.
-
Memory Protection Battery that protects data and the customers programmed configuration from memory loss. This information will be maintained in a powerless system for at least six years.
-
16 DTMF receivers.
-
16 Busy Tone (BT) detector circuits for Auto Busy Redial (ABR).
-
64 conference circuits.
-
Digital volume PAD technology enables audio volume to be adjusted in eight steps to compensate for conference and/or CO line network losses.
The optional Serial Port Interface Subassembly (BSIS1A) can be installed on the processor to provide RS-232 interface ports for SMDR interface to Call Accounting devices, SMDI for external Voice Mail devices, and future applications. The BSIS1A is not needed for the GVPH1A voice mail system because the GVPH1A uses built-in SMDI through the back plane.